Application of Overstrength Factor per ASCE 7-16 §12.2.1

The application of an overstrength factor, Ω_o, is applied to some seismic load combinations in ASCE/SEI 7. These load combinations are attempted for members or connections whose inelastic behavior cause poor system performance.

Next Topic

The Overstrength Factor per ASCE 7-16 with ideCAD

Related Topics

• Application of Deflection Amplification Factor per ASCE 7-16 §11.2.1

• Redundancy Factor per ASCE 7-16 §12.3.4

• Response Modification Coefficient for Modal Analysis per ASCE 7-16 with ideCAD

• Reduced Design Response Spectrum for Modal Analysis per ASCE 7-16 §12.9.1.2

• Vertical Seismic Load Effect per ASCE 7-16 §12.4.2.2